behr ES 2+2, ES 6

Randall Extraction - Semi-automatic hot extraction apparatus (4 and 6 places)
Areas of use

Food analysisOil & fat analysisBeverage industryFeed analysisAgricultural industryEnvironmental analysisChemicals & plastics industryCosmetics industryPharmaceuticals industryR&D laboratories

Parameter to be analyzed

Extractable componentsExtract contentFatFree fatOil contentResidual resinBound fatNon fatCaffeineTeinFiberNon-extractable component

Sample material

BeansFish and fish productsMeat and meat productsFeedFeed and raw materialsShrimpsCoffeeCocoa and cocoa productsPlasticsLiverAlmondsMarzipanMilk and milk productsNutritionOilseedsOlivesMustard seedsSweetsTeaTextilesCellulose

Hot extraction according to Randall - the quicker extraction method

Randall Extraction - Semi-automatic hot extraction apparatus (4 and 6 places)
Randall Extraction - Semi-automatic hot extraction apparatus (4 and 6 places)
Randall Extraction - Semi-automatic hot extraction apparatus (4 and 6 places)
Randall Extraction - Semi-automatic hot extraction apparatus (4 and 6 places)

The semi-automatic extraction systems ES 2+2 / ES 6 save time and costs by a fast extraction.

The hot extraction system following Randall is several times faster than the conventional Soxhlet extraction.

Boiling

During the first step, the extraction sleeve is with the sample in the vessel with the boiling extractant, like a tea bag in a cup with hot water. Most of the substance that is to be extracted enters the solution in this step and distributes itself in the solvent.

The upper part of the device acts simply like a reflux cooler; the condensate drips into the extraction sleeve and helps bring the substance into the solution.

Rinsing

In a second step, the extraction sleeve is pulled out of the sump. Extract still adheres to it; and there still might be substance in the sample that has not yet dissolved. The condensate from the cooler rinses the extract and little by little dissolves the undissolved parts.

If you wish to further process the extract, this means the extraction is complete at this stage. Otherwise, you remove the solvent in a third step.

Recovery

When evaporating, close the return cock on the cooler, the condensate collects in the lower part of the cooler; you can reuse it for the next extraction. Thanks to the short routes of the device, the sample can be evaporated until it is virtually dry.

  • Step-by-step user-friendly instructions on the display
  • One heating program for all sample positions, but separate heating for each sample position
  • Cooling water manifold ensures uniform cooling at all sample locations
  • Low solvent losses due to the specially designed behrotest® coolers
  • 31 freely configurable programs for your individual extraction applications
  • behr one-button operation for particularly fast and easy programming
  • Audible and visual error messages
  • Integrated overtemperature protection
  • Resource-saving cooling water saving program

  Randall Extraction - Semi-automatic hot extraction apparatus (4 and 6 places) - ES 2+2 [B00704623] Randall Extraction - Semi-automatic hot extraction apparatus (4 and 6 places) - ES 6 [B00704624]
ES 2+2 ES 6
Item number B00704623 B00704624
Packaging quantity 1
Width (in cm) 56.00 72.00
Depth (in cm) 52.00
Height (in cm) 67.00
Weight (in kg) 42.00 50.00
Controller Nein
Adjustment programmierbar
Frequency (in Hz) 50/60
Power consumption (in W) 1000 1500
Programs 31
Degree of automation halbautomatisch
Display LCD
Sample positions 4 6
Glass vessel size (in ml) 75
Temperature range max. (in °C) 260
Solvent volume min. (in ml) 60
Solvent volume max. (in ml) 75

The benefits of the hot extraction procedure are

  • A compact device with short paths
  • Low need of solvent
  • Short extraction duration - typically about an hour.

Due to the short extraction duration, hot extraction is also gentle for the extractant.

There are now an increasing number of standardized analyses procedures that make use of hot extraction.

Up to 50% - 70% faster than the classic Soxhlet method (depending on sample material)

  • Food analysis
  • Oil & fat analysis
  • Beverage industry
  • Feed analysis
  • Agricultural industry
  • Environmental analysis
  • Chemicals & plastics industry
  • Cosmetics industry
  • Pharmaceuticals industry
  • R&D laboratories
Content Filesize last updated
(PDF) Download Flyer Siedeverzug 166.4 KB 22.02.2024
(PDF) Download P Extraktion 8.8 MB 11.05.2023
(PDF) Download P Futtermittelanalytik 1.9 MB 22.02.2024

Article

Art.-No.
ES 2+2 for 4 sample places with 100 ml extraction tubes
B00704623
ES 6 for 6 sample places with 100 ml extraction tubes
B00704624

Accessories

Extraktion - Extraction sleeves (EX HS) - EX 75 HS [B00600441]

EX 75 HS

Extraction sleeves for reaction vessel FF 30
B00600441

Error

No product found for art.no. [B00707723].B00707723
Extraktion - Extraction cup (EB_) - FF 30 [B00687525]

FF 30

Reaction vessel
B00687525
Extraktion - Sleeve stand (RIP) - TGE 4 [B00734885]

TGE 4

for 4 reaction vessels
B00734885
Extraktion - Sleeve stand (RIP) - TGE 6 [B00734886]

TGE 6

for 6 reaction vessels
B00734886

Error

No product found for art.no. [B00734880].B00734880

Error

No product found for art.no. [B00734881].B00734881
Extraktion - Boiling stones (SIST) - SIST 100 [B00217914]

SIST 100

Boiling stones, 100 g
B00217914
Extraktion - EXK300 - EXK300 [B00711550]

EXK300

behrotest Desiccator, borosilicate glass 3.3, with plastic knob and porcelain plate (DN 300)
B00711550

Error

No product found for art.no. [B00726297].B00726297

Error

No product found for art.no. [B00726298].B00726298

Error

No product found for art.no. [B00734884].B00734884

Error

No product found for art.no. [B00734892].B00734892

Error

No product found for art.no. [B00734878].B00734878